To Next PageTo Next Page
Need help?Do you have a question about the Motorola PRO Series and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| IP Rating | IP54 |
| Operating Temperature | -30°C to +60°C |
| Frequency Range | VHF: 136-174 MHz, UHF: 403-470 MHz |
| Power Output | 1-5W (VHF), 1-4W (UHF) |
Crucial safety and operational guidelines for the two-way radio.
Details RF exposure compliance and proper radio operation for EME guidelines.
Information on avoiding EMI in facilities and aircraft, and sensitive environments.
Precautions for using radios near pacemakers, hearing aids, and other medical devices.
Safety guidelines for driving, vehicle airbags, and explosive atmospheres.
Cautions regarding damaged antennas, batteries, and blasting areas.
Defines manual purpose and outlines warranty and service support.
Details after-warranty support, piece parts, and technical contacts.
Explains how to interpret radio model numbers and their specific characteristics.
Details FMRC approved equipment for hazardous atmospheres and associated safety labels.
Discusses user responsibility for repairs and adherence to FMRC standards for repairs and relabeling.
Emphasizes using only FMRC approved system components for safety.
Recommendations for periodic inspection, cleaning, and general maintenance of the radio.
Precautions for handling static-sensitive CMOS/LDMOS devices to prevent damage.
Guidelines for parts replacement, substitution, and soldering on circuit boards.
General advice, tools, and precautions for handling flexible circuits during disassembly.
Step-by-step guide for removing the front cover from the radio chassis.
Instructions for disassembling the main board from the radio chassis.
Procedures for removing the keypad and its associated boards.
Steps for removing the display module and speaker/microphone flex.
Instructions for disassembling PTT button and control top assemblies.
Steps for reassembling speaker/microphone flex, keypad, and option boards.
Instructions for reassembling the chassis, main board, and front cover.
Guide for activating DTMF functionality using software and kit installation.
Procedures for installing option boards and associated flex circuits.
