Receiving and Making Calls
English
20
Selecting a Channel
Transmissions are sent and received on a channel. Depending
on your radio’s configuration, each channel may have been
programmed differently to support different groups of users or
supplied with different features. After selecting the relevant
Zone, select the relevant channel you require to transmit or
receive on.
Procedure:
Once the required zone is set (if you have multiple zones in
your radio), turn the Channel Selector Knob to select the
number that represents the channel, subscriber ID, or group
ID.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is set, you can
proceed to receive and respond to calls.
The LED lights up solid green while the radio is transmitting and
blinks when the radio is receiving.
NOTE: The LED lights up solid green while the radio is
transmitting and double blinks green when the radio is
receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio
must have the same Privacy Key, OR the same Key
Value and Key ID (programmed by your dealer) as
the transmitting radio (the radio you are receiving
the call from).
To Next Page
Loading...
Need help?
General
