Receiving and Making Calls
English
27
Making an All Call
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Procedure:
1 Select the channel with the active group alias or ID. See
Selecting a Channel on page 20.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid green.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Users on the channel cannot respond to an All Call.
Making a Phone Call with the
Programmable Phone Button
Procedure:
1 Press the programmed Phone button.
2 The LED lights up solid green.
3 You hear the dialing tone of the telephone user.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to talk and release it to listen.
6 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7 You hear a short tone.
When you press PTT button while in the Phone Contacts
screen, a tone sounds.
When the telephone user ends the call, a tone sounds.
During the call, when you press One Touch Access button with
the deaccess code preconfigured, your radio attempts to end
the call.
To Next Page
Loading...
Need help?
General
