EasyManuals Logo

Motorola DP3441 User Manual

Motorola DP3441
544 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Advanced Features
English
38
Mode is disabled. The LED blinks red and the radio remains
in Emergency mode.
5 To transmit again, press the PTT button.
OR
Press the programmed Emergency Off button to exit the
Emergency mode.
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode, or allow any received calls
to sound through the radio’s speaker, until the programmed hot
mic transmission period is over, and you press the PTT button.
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode when you
are making the call with hot mic, but allow sound through the
radio’s speaker when the target radio responds after the
programmed hot mic transmission period is over. The indicators
will only appear when you press the PTT button.
NOTE: If the Emergency Alarm request fails, the radio does
not retry to send the request, and enters the hot mic
state directly.
Reinitiating an Emergency Mode
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
There are two instances where this can happen:
You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm is
enabled on this new channel, the radio reinitiates Emergency.
You press the programmed Emergency On button during an
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
Exiting an Emergency Mode After Sending the
Emergency Alarm
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when one of the following
occurs:
Emergency Alarm acknowledgement is received (for
Emergency Alarm only), OR
An Emergency Exit Telegram is received, OR
All retries to send the alarm have been exhausted, OR
The Emergency Off button is pressed.
Turn the radio off and then power it on again if your radio has
been programmed to remain on the Emergency Revert
channel even after acknowledgement is received.
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency
mode automatically when it is turned on again.
EMEA.book Page 38 Wednesday, May 13, 2015 8:47 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola DP3441 and is the answer not in the manual?

Motorola DP3441 Specifications

General IconGeneral
BrandMotorola
ModelDP3441
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals