Motorola DROID RAZR MAXX User Manual

43Wireless
3 Touch Configure Mobile Hotspot to change hotspot
security and configuration settings:
•Network SSID—Enter a unique name for your
hotspot and touch
Next .
•Security—Select the type of security you want,
and touch
Save : WEP , WPA , or WPA2 . Enter a
unique password. Other users can access your
Wi-Fi hotspot only if they enter the correct
password.
Note: Keep it secure. To protect your smartphone
and hotspot from unauthorized access, it is
strongly recommended that you set up hotspot
Security ( WPA2 is the most secure), including
password.
• Broadcast Channel—Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
4 Touch
Save when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s
SSID ,
selecting a
Security type, and entering the correct
Wireless password .
Bluetooth® handsfree devices
Turn Bluetooth power on or off
Find it: Menu > Settings > Wireless & networks
>
Bluetooth
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Menu >
Settings > Wireless & networks
>
Bluetooth settings .
3 Touch
Bluetooth to turn on and scan. If Bluetooth
power is already on, touch
Scan for devices .
4 Touch a device to connect.
5 If necessary, touch
OK , or enter the device passkey
(like
0000 ) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.

Motorola DROID RAZR MAXX Specifications

General

Brand	Motorola
Model	DROID RAZR MAXX
Category	Cell Phone
Language	English