Motorola edge 40 NEO User Manual

5
Put in the card and power on
Nano SIM
eSIM option: your phone may have an eSIM (embedded SIM card) in
addition to the physical SIM card. Contact your service provider for
details if you want to activate and use it.
1 Insert the SIM tool
into the tray hole to
pop out the tray.
Make sure you use
the correct size SIM
card and don't cut
the SIM card.
2 Insert the SIM
card with the gold
contacts up, then
gently push the tray
into the slot.
3 Press and hold the
power button to turn
on your phone, then
follow the prompts to
get started.
Note: to turn o your
phone, press the
power and Volume
up buttons at the
same time.

Motorola edge 40 NEO Specifications

General

Display Size	6.55 inches
Display Type	P-OLED
Resolution	1080 x 2400 pixels
Refresh Rate	144Hz
Processor	MediaTek Dimensity 7030
CPU	Octa-core (2x2.5 GHz Cortex-A78 & 6x2.0 GHz Cortex-A55)
GPU	Mali-G610 MC3
Rear Camera	50 MP (wide) + 13 MP (ultrawide)
Front Camera	32 MP
Battery Capacity	5000 mAh
Operating System	Android 13
Dimensions	159.6 x 72 x 7.8 mm
Water Resistance	IP68
RAM	8GB
Storage	256GB
Charging	68W wired