36
English
UTILITIES
Using the Menu LONE WORKER
The Lone Worker feature enables you to work
alone with added safety.
You can switch On or Off Lone Worker by using
a preprogrammed Lone Worker button or via the
menu.
Using the Lone Worker Button
1. Press the Lone Worker button to switch
Lone Worker on, when the feature enable
alert will sound and the display will show:
• You will be reminded at intervals that Lone
Worker is switched on by a high pitched
alert tone (Lone Worker Reminder) being
sounded.
• Press any button to respond and cancel
the alert, if you do not the radio will enter
the Emergency state.
1 Ensure radio is in IDLE STATE.
2 c to enter Menu Mode.
3 + or e until:
4 c to select
5 + or e until:
6 c to select
Display shows
current status e.g. :
7 + or e until:
8 c to select
Display shows:
(for 2 seconds)
9 Radio exits menu
mode and display
shows e.g.:
Utilities
Whisper
Off
On
Selected
Chan: 05
Lone Wkr On
To Next Page
Loading...
Need help?
General
