Motorola GP68 - Conventional

Model ST-865M3 SmarTrunk II
TM
Logic Board
22
Primary Code 4100 4101 4102 4103
Secondary Code 4100 4103 4104 4104
2.2 Conventional
If the Conventional Mode feature is enabled, the subscriber may switch
to Conventional Mode operation by pressing the 5 key then pressing the
(*) key on the keypad (PTT not pressed). The subscriber may then set
the channel select switch to the desired conventional channel position. If
the channel select switch is set to a SmarTrunk II trunked channel position,
the radio will emit a continuous string of high pitched beeps to alert the
subscriber that the channel selected is trunked operation only.
The subscriber may return to trunking operation by pressing the # key on
the radio keypad. The channel select switch MUST be set to a valid
CONVENTIONAL channel when the # key is pressed.
Subscriber
Equipment
#1
Subscriber
Equipment
#4
Subscriber
Equipment
#3
Subscriber
Equipment
#2
Table 2-2  Mobile Programming