4 • ST-865M3 Programming
39
4.2.13 Conventional Operating Mode
This program code enables or disables the ability of the
radio to operate in conventional mode on non SmarTrunk
channels.
To program this function: Enter the program code 23
followed by the # key, then enter 0 or 1 followed by the
# key. "0" disables the conventional operation capabil-
ity, "1" enables the capability. Non SmarTrunk chan-
nels should be programmed as required using normal
radio programming procedures.
Example: To enable conventional operation
capability press: 23 # 1 #.
To Next Page
Loading...
