Audio tones
The audio tones provide information about your headset status.
Audio tone Headset status
Single high tone when pressing Volume at minimum or maximum
volume button
5 rapid high tones repeated Low battery
every 60 seconds
No audio indications: deteriorating quality Out of range
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Voice activation
Dual high/low tone Voice tag not recognized
Single high tone End call
Low to high tone Phone network not available
2 ascending tones Mute enabled
2 descending tones Mute disabled
Troubleshooting
My phone does not find my headset: make sure the blue light on your
headset is steadily lit when you phone is searching for devices
My headset worked before but now it is not working: Make sure the
Bluetooth feature is turned on in your phone. If the Bluetooth feature has
been turned off or was turned on temporarily, you may need to restart the
Bluetooth feature and pair your phone and headset again.
If you have any additional questions, please call your hotline number
(0870-9010-555) or visit us at www.hellomoto.com.
9
English
To Next Page
Loading...
