11
③
PAIR
Your Headset
Before you can use your headset, you must pair (link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING MODE
Remove headset from charging base or desktop charger and power on by
sliding Power switch to the On position (towards Power symbol on headset).
The indicator light rst ashes during power up, then initiates easy pairing.
After a few moments, the indicator light will be steadily lit in blue to indicate
headset is in pairing mode.
If the headset does not enter pairing mode, see TROUBLESHOOTING for help.
Indicator Light
(steadily blue
for pairing mode)
To Next Page
Loading...
