How to use the Motorola Halo+?
Set Night Light
The nightlight feature provides a soft glow to help soothe your baby to sleep and help keep them
calm throughout the night.
Press button once to switch Night Light on, tap again to select 7 colour options. The light has 3
levels of brightness available.
Set Lightshow Projector
Toggle button to switch Light Show Project on or off.
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When
the built-in photo sensor on the front of the Unit detects a low level of ambient light, the LEDs
will
automatically activate and the screen on the Parent Unit will display in black and white. The icon
will be displayed at the top of the screen.
Talk Mode
Press and hold the TALK button T on the parent unit to talk to your lovely baby through the
baby unit’s loudspeaker.
Adjust Parent Unit volume
There are 8 volume levels on Parent unit, including volume off. Press < to increase or > to
decrease the volume of Parent Unit.
Video ON/OFF
When it is at standby mode, toggle VIDEO On/Off button to turn the LCD screen on or off,
whilst still leaving the audio monitor on.
Sleep activity monitor
Press to review the sleep activity graph of your baby recorded by the camera.
Can I view multiple cameras on screen?
This function is only available when you have more than 1 Baby Unit (Camera). When the Split
Screen function is On, you can view multiple cameras on the screen, although only hear audio
from one screen at a time.
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted.
3. Press the + UP button or - DOWN button to select Split Screen On / Off .
4. When the Split Screen function is On, you can press the < LEFT button or > RIGHT button / +
To Next Page
Loading...
Need help?
General
