Getting Started
2 Open the connector cover.
3 Plug the other end of the charger into the
accessory connector.
Charger Attached or Device Attached appears
on the internal display.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
4 If you have purchased optional batteries or
chargers, see “Charging Times”.
Charging Times
See your battery and charger to determine the
appropriate charging time.
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Prolonged charging is not recommended.
connector
cover
Battery Charger
Rapid Mid-Rate
High
Performance
2 hours 4 hours
Maximum
Capacity
3.5 hours 7.5 hours
To Next Page
Loading...
