34 Section 2A. Making and Answering Calls
There are two types of pauses available on your phone:
䢇 Wait sends the next set of numbers when prompted.
䢇 Pause automatically sends the next set of numbers
after three seconds.
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press and hold * until the letter P appears. The P
represents a three-second pause. If you want a
pause longer than three seconds, press and hold
* more than once. Each
P represents a three-
second pause.
– or –
Press and hold * until the letter
W appears. The
W means your phone waits before dialing further. A
message appears asking if you want to send the
rest of the digits.
3. Enter additional numbers.
4. Press N to dial the number.
– or –
Press M
> Store Number to save the number in
your Contacts.
Dialing From the Contacts List
1. Press M > Contacts.
2. Highlight the entry you want to call and press N to
dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight
the name, press the navigation key right or left until
the correct number type appears, and then
press N.
Making a Call From Recent Calls
If you have numbers stored in the Recent Calls list, you
can use these numbers to make calls. For information
on the Recent Calls list, see “Recent Calls” on page 92.
Note
You can have multiple pauses in a phone number
and combine waits and pauses.
Note
When dialing a number with a wait, press Yes (left
softkey) to send the next set of numbers.
Shortcut
From standby mode, press Contacts (left
softkey) to list entries.
To Next Page
Loading...
