48 Section 2A. Making and Answering Calls
4.
A checkmark appears next to the fields that will be
sent. To add or remove the checkmark, select the
field.
5. When you are finished, press Done (left softkey).
To control whether your information is sent automatically:
1. Press M > My Info.
2. Press M.
3. Select Direct Send Setup > Auto Send.
4. Select On to send your information automatically,
or
Off to send your information only when you
choose to send it.
To send My Info during a call:
1. While in a Direct Connect call, press M.
2. With Direct Send My... highlighted, press r.
3. When Ready to Send appears on the display, press
the Direct Connect button to send the information.
To start a call by sending My Info:
1. Press M > My Info.
2. Press M.
3. With Direct Send My Info highlighted, press r.
4. Use the keypad to enter the Direct Connect
number you want to send the information to.
– or –
Press
Browse (left softkey). Select Contacts, Recent
Calls, or Memo. Select the number you want to
enter.
5. When Ready to Send appears on the display, press
the Direct Connect button to send the information.
Sending Contact Information
You can send contact information by selecting a
Contacts entry.
Contacts entries that contain only addresses cannot be
sent. When Contacts entries are received, they do not
include ring tones or pictures.
Note
When you receive your phone, it is set to send your
information automatically.
To Next Page
Loading...
