English 14 Using Your Phone
International Phone Calls
To make an international phone call press and hold the 0
key. After a couple of seconds the international dialling prefix
+ will appear in the display, this allows you to call from any
country without knowing the local international access code.
Now enter the country code, followed by the phone number.
The country code follows the conventional format, 49 for
Germany, 44 for the UK, 46 for Sweden, etc.
Just like a conventional international call, remove the leading
'0' of the area code when you dial.
Inserting Pauses Into Phone Numbers
To obtain a three second 'pause' character in a phone number,
press and hold the * key for a couple of seconds, the pause
symbol Ü will appear.
The pause character produces a three second delay whenever
it is used. However, the first pause character in a phone
number is a special case, it will not begin its delay until the call
is answered.
Redialling the Last Number Called
To call the last number dialled, press the O key when in
standby mode. The last number dialled will be shown in the
display, press O to call the number.
O One Touch Dialling Phone Book Numbers
To quickly retrieve and dial a number stored in Phone Book
locations 1 to 9, press and hold the appropriate digit key. For
example, pressing and holding 2 will dial the phone number
stored in location 2 of your Phone Book.
AYou do not need to press O to call the number.
O Dialling Phone Book Numbers
To quickly retrieve a number from your Phone Book:
Press QG. For example Q23 will retrieve the
phone number stored in location 23 of your Phone Book.
Press OO to call the number.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
given in Using the Messages Menu.
To Next Page
Loading...
