Motorola IT.6.2T Quick Start Guide

metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
IMPORTANT
The base station must be plugged
into the mains power at all times.
Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
Step 2. Connect the charger
(Multi packs only)
• Plug the mains power cable
into the socket marked
on
the underside of the charger
and plug the other end into the
mains power wall socket.
• Switch on the power supply.
Step 3. Charge the handset
• Place the handset on the base
and charge for at least 24
hours. When the handset is
fully charged, the
icon is
displayed.
IMPORTANT
You cannot access the battery in
the handset. Do not attempt to
remove the battery, as you may
damage the phone. If you need
to replace the battery, contact
customer services.
• When the handset is fully
charged, plug the telephone
line cord into the socket
marked
on the underside of
the base and plug the other end
into the telephone wall socket.
Digital Cordless Telephone with Answering Machine
Mobile Connectivity with Bluetooth
®
Wireless
Technology
IT.6T Quick Start Guide
For IT.6.1T, IT.6.2T, IT.6.3T and IT.6.4T
This Quick Start Guide provides all the information
you need to get you started. If you need more detailed
instructions, please refer to the full user guide available
in the giftbox.
Alternatively, contact Customer Services on:
0800 0820750.
Opening hours: Mon-Fri: 9:00am - 5:30pm
/Sat: 9:00am - 2:00pm.
If you have purchased a multi pack
you will also have the following
additional items:
Twin 1 x Additional handset
and charger.
1 x Mains power
adaptor for charger.
Trio 2 x Additional handset
and charger.
2 x Mains power
adaptor for charger.
Quad 3 x Additional handset
and charger.
3 x Mains power
adaptor for charger.
IMPORTANT
Only use the telephone line cord
supplied. This equipment is not
designed for making emergency
telephone calls when the power
fails. Alternative arrangements
should be made for access to
emergency services.
Warning! You cannot access the
battery in the handset.
BATTERY LOW WARNING
If
icon flashes on the display
and you hear a warning beep every
minute during a call, you will need
to recharge the handset before you
can use it again.
When charging,
icon will scroll
on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged
battery should give up to 7 hours
talk time or up to 100 hours standby
time on a single charge.
1
Note that the new battery does not
reach the full capacity until it has
been put to normal use for several
days.
To keep the battery in the best
condition, leave the handset o the
base for a few hours at a time.
1
All talk and standby times are
approximate and depend on
features selected and usage
pattern.
Step 1. Set up the base
• Plug the mains power cable into
the socket marked
on the
underside of the base and plug
the other end into the mains
power wall socket.
• Switch on the power supply
NOTE
Position the base at least 1
Box Contents Getting started
Display icons
Steady when the handset is registered and within range of
the base. Flashes when handset is out of range or
searching for the base.
Displays when ECO mode is on.
Displays when ECO PLUS is on.
Bluetooth function is activated.
Bluetooth headset is paired.
Displays when you have missed calls in the Calls list.
1
Handset ringer volume is O.
Displays when in hands-free mode.
Displays when Do Not Disturb is activated.
Displays when the answering machine is on.
Displays when you have new voicemails.
The alarm clock has been set.
NOTE
Some icons replace others along the top of the display depending which
function is activated.
The approximate power levels of your battery are indicated as follows:
Battery is fully charged
Battery is partially charged
Battery is running low
Flashes when the battery is almost fully discharged.
1
For this feature to work, you must subscribe to Caller ID Service from your
network operator. A subscription fee may be payable.
1
2
IT.6T base
IT.6T handset
Mains power adaptor for
the base
Guides
Telephone line cord
Handset
Display
Phonebook / Scroll up
/ Volume up
In standby mode, press to
open phonebook menu.
Scroll up through lists and
menus.
Increase the earpiece and
hands-free volume.
When the phone is ringing,
press to increase the
handset ringer volume.
Menu / OK / Left
softkey
In standby mode, press to
open the Menu.
Press to select menu
options and to conrm a
displayed option.
Scroll Left
Scroll left though the menu.
Moves the cursor to the left
during editing.
Talk / Recall
Make or answer a call.
Use recall (R) functions.
* / Intercom
Dial a *.
Press to make an internal
call.
Hands-free
Activate and deactivate
hands-free during a call.
Space / Key lock
Press to inset a space in text
/ number editing
Press and hold to lock /
unlock the keypad.
Redial / Clear / Right
softkey
In standby press to enter the
redial list.
Press to delete text or
numbers.
Press and hold to delete
all text.
Select the function displayed
on the handset screen
immediately above key.
Scroll right
Scroll right though the
menu.
Moves the cursor to the right
during editing.
End call / Exit / Switch
Handset On / O
End the call.
Exit menu or operation.
Press and hold to switch the
handset on / o.
Calls List / Scroll down
/ Volume down
In standby mode, press to go
to the Calls list and Answer
machine menu.
Scroll down through lists and
menus.
Decrease the earpiece and
hands-free volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
# / Pause / Change
case
Press and hold to enter a
pause (P) when pre-dialling
or storing numbers.
Press to switch between
upper and lower case during
text editing.
Microphone
Getting started
Step 4. Removing the battery
cover:
If you have purchased an IT.6T with
extra colour covers or have purchased
the covers separately you will need
to remove the original cover to then
replace with the new cover.
• To remove the cover push down
and slide the cover o.
• To replace the cover, line up the
hooks on the cover with the slots
in the back of the handset and
slide up until it is in place.
Step 5. Set the date and time:
• Press
Menu , scroll to Date & Time
and press OK .
•
Enter Date is highlighted. Press OK .
• Enter the date using the format
DD-MM-YYYY e.g. 04-08-2015
for 4 August 2015 and press
OK .
• Scroll down to
Enter Time and
press OK .
• Enter the time (hh:mm) and
press
OK .
If the current time format setting
is 12 hour, press * to select am
or pm .
1
2
Earpiece
Answering machine
The IT.6T answering machine records unanswered calls when it is
activated. It can store up to 59 messages within the maximum recording
time of 60 minutes. Each message can be up to 3 minutes long. Your
personalised outgoing messages can be up to 3 minutes long.
You can operate your answering machine from:
• the base.
• the handset.
• remotely, from another phone
Base control keys
Press to switch the answering machine on/o.
Press to play all stored messages.
Press to stop message playback.
Skip to the next message during message playback.
Press to skip back to previous message.
Delete current message during message playback.
Increase speaker volume during message playback.
Decrease speaker volume.
1
Lights up when Mobile 1 is connected via bluetooth.
2
Lights up when Mobile 2 is connected via bluetooth.
Socket to charge your mobile phone.
In standby, press to ring the handset(s).
Press and hold to enter registration mode when registering handsets.
(The page key can be found on the underside of the base).
Mute
During a call, press to turn
mute on / o.
Push down
Remove
1
2
Slide
Replace
Line up hooks
on the back
cover with the
slots on the
handset
1
Slide
2

Motorola IT.6.2T Specifications

General

Brand	Motorola
Model	IT.6.2T
Category	Cordless Telephone
Language	English