Getting started 7
1.1 Connect the base
1.
Plug the power adapter with the smaller round pin plug
and telephone line cord into the base. The power
adapter with the larger round pin is for the charger (only
in multi-handset packs).
2.
Plug the other end of the power adapter and telephone
line cord into a power outlet.
3.
Use only the provided power adapter.
1.2 Install and charge the handset
battery pack
1.
Slide off the battery compartment cover to remove it.
Place the supplied rechargeable battery pack in the
battery compartment, with the battery connector
plugged in, as shown.
2.
Slide the battery compartment cover back on.
3.
Put the handset on the base to charge for at least 24
hours. Once charged, the (battery icon) will indicate
that the handset is fully charged.
To Next Page
Loading...
Need help?
General
