12 Using the phone
3. Using the phone
3.1 Making a call
1. Enter the phone number and then press /FLASH or /SPEAKER to dial the
phone number.
3.2 Speed dial calling
1. In idle mode, press and hold a key from /1 to WXYZ/9 until the number is
displayed and dialed.
3.3 Answering a call
1. Press /FLASH or /SPEAKER to answer the incoming call.
3.4 Ending a call
1. During a call, press /BACK or put the handset on the base.
3.5 Adjusting volume
1. During a call, press VOL+ or REDIAL/VOL- to adjust the volume.
3.6 Muting a call
1. During a call, press MUTE to mute the microphone, so that you can talk to someone
else in the room without your caller hearing you.
2. Press MUTE again to unmute.
3.7 Dialing from the redial list
1. Press REDIAL/VOL- and then VOL+ or REDIAL/VOL- to scroll and select an entry you
want to redial.
2. Press /FLASH or /SPEAKER to dial the number.
3.8 Dialing from the calls list
1. Press CID and then VOL+ or REDIAL/VOL- to select the entry you want to dial.
2. To g g l e t h e # / / PAUSE/FORMAT key to format the dialing number.
3. Press /FLASH or /SPEAKER to dial the number.
3.9 Adding an entry to the phonebook
1. Press .
2. Press MENU and then VOL+ or REDIAL/VOL- to scroll and select
ADD
.
3. Press MENU and then enter the name.
4. Press MENU and then enter the number.
5. Press MENU to save.
To Next Page
Loading...
Need help?
General
