Getting started 7
1.1 Connecting the base
1. Plug the power adapter and the telephone line cord into
the base. The power adapter with the larger pin is for
the charger (only in multi- handset packs).
2. Plug the other end of the power adapter into a power
outlet and the telephone line cord into a telephone wall
jack.
3. Use only the provided power adapter.
1.2 Installing and charging the handset
battery pack
1. Slide off the battery compartment cover to remove it.
Place the supplied rechargeable battery pack in the
battery compartment, with the battery connector
plugged in, as shown.
To Next Page
Loading...
Need help?
General
