GETTING TO KNOW YOUR PHONE 13
ENGLISH
3. CELL 1 LED-BLUE
a) Steadily on: When Bluetooth device #1 is paired and connected to the base.
b) Flashes: When Bluetooth device #1 is in the pairing up process.
c) Off: When Bluetooth device #1 is disconnected.
4. CELL 2 LED-BLUE
a) Steadily on: When Bluetooth device #2 is paired and connected to the base.
b) Flashes: When Bluetooth device #2 is in the pairing up process.
c) Off: When Bluetooth device #2 is disconnected.
5. FIND
a) Press to find/page all registered handsets. Press the button again, or any key on the
handset, to stop paging.
b) Press and hold to enter registration mode.
Base LED indicators
7-SEG LED DISPLAY
Answering machine is OFF.
There is no message in the answering machine.
Flash in idle: Indicates the number of new answering machine messages.
(e.g. there are 9 answering machine messages in total, with a capacity of 59.)
Steadily On: All the new messages have been listened to and there are 9 answering
machine messages in total.
Flashing: The memory of the answering machine is full.
Flashing: Indicates an incoming call/recording of an incoming call. The number
(e.g. 09) indicates the total number of new messages.
Flashing: Indicates the handset or line remote access is in progress.
To Next Page
Loading...
Need help?
General
