GETTING STARTED 7
ENGLISH
1.1 Connecting the base
1. Insert the DC plug of the power adapter and the telephone line cord into the base, as
shown above. The power adapter with the larger DC plug is for the charger (only in
multi-handset packs).
2. Insert the other end of the power adapter into a power outlet and the telephone line
cord into a telephone wall jack.
3. Use only the supplied power adapter.
1.2 Installing and charging the handset battery pack
1. Slide off the battery compartment cover to remove it. Place the supplied
rechargeable battery pack in the battery compartment, and insert the plug of the
battery pack into the socket, as shown above.
2. Slide the battery compartment cover back on.
3. Put the handset on the base to charge for at least 24 hours. Once charging completed,
the will indicate that the handset is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided with the product.
To Next Page
Loading...
Need help?
General
