3.1
Camera Configuration Examples
Figure 12: Possible Camera Mounting Locations
Following are the best practices for mounting the camera.
• One lane per camera.
• Camera aiming calibration is done with the IR camera, not color camera.
• Cameras should be positioned before you use the LPR scanning.
• Cameras are selected based on the use case scenarios.
• Use the CarDetector Mobile “Camera Aiming Tool” for aiming assistance.
Mobile Camera Suitable Usage
ReaperHD/L5M 6 mm Short Parking
ReaperHD/L5M 8 mm Long Parking
MN009210A01-AB
Chapter 3 : Camera Configurations
25
To Next Page
Loading...
