MODELS:
MBP36S,
MBP36S-2,
MBP36S-3,
MBP36S-4
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Digital Video Baby Monitor
Connect the small plug of
the power adapter to the
Baby Unit and the other end
to the electrical outlet.
Only use the enclosed
adapter (5V DC/1000mA).
Ensure the ON/OFF switch
is at "ON" position.
A. Connecting power supply for the Baby Unit
Insert the wire tab of the
rechargeable battery pack
into the contact slot as
shown above and fit the
battery pack into the
compartment.
B. Installing the battery pack for the Parent Unit
Red
Black
Small cross head or
Flat end screw driver
C. Fastening the cover for the Parent Unit
Connect the small plug of
the power adapter to the
parent unit and the other
end to the electrical outlet.
Only use the enclosed
adapter (5V DC / 600mA).
Recommend charging at
least 12 hours before first
use.
D. Connecting power supply for the Parent Unit
WARNING:
STRANGULATION HAZARD - Keep the Unit and adapter cords more than 3 feet from the crib and out of baby's reach.
NEVER place camera or cords within the crib. Secure the cords more than 3 feet away from the baby's reach.
Never use extension cords with AC Adapters. Only use the AC Adapters provided.
To Next Page
Need help?
General
