Motorola MBP36S
GENERAL QUESTIONS
Which additional camera is compatible with my monitor?
The MBP33SCBU and MBP36SCBU will be compatible with this monitor. This model can easily
be recognized by the green dot sticker on the box and underneath the camera next to the serial
number.
I just purchased an additional camera. How do I pair a second camera?
Select “add” at the camera menu screen on the display. Select a camera, 1, 2, 3, or 4. An LED on the
display will blink and the display will show “press pair on cam”. On the bottom of the camera unit,
press the pair button. A confirmation beep will sound.
I have more than one camera paired but the view is from only one camera. How do I select which
camera I am viewing?
This function is only available when you have more than 1 Baby Unit (Camera).
Select “view” in the camera menu screen on the display. Then select of the paired cameras to view.
You can also select “SCAN” to constantly toggle views between cameras.
Do I need to register my Baby Unit to the Parent Unit?
No, the Baby Unit is pre-registered to your Parent Unit. You do not need to register it again unless
the Baby Unit loses its link with the Parent Unit. Please consult your User Guide should you need
to pair your units together again.
How does the night vision mode work?
The Baby Unit has infra-red LEDs for picking up clear images in the dark. When the built-in light
sensor on the front of the unit detects a low level of ambient light, the LEDs will activate
automatically and the screen on the Parent Unit will display in black and white. The night vision
mode icon will be displayed at the top of the screen.
To Next Page
Need help?
General
