UK EN
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Digital Video Baby Monitor
WARNING:
Strangulation Hazard:
Children have
STRANGLED in cords.
Keep this cord out of the
reach of children (more
than 1m (3ft) away).
Never use extension
cords with AC Adapters.
Only use the AC Adapters
provided.
Power adapter plug
Slide to the ON position
to switch ON the Camera.
Give enough space
around the temperature
sensor.
Wall
2”
• Connect the power adapter to a mains
power socket and insert the plug into the
micro USB socket on the back of the Baby
Unit.
• Slide the ON/OFF switch to the ON
position. The power indicator LED will light
up in green.
B. Install battery pack for the
Parent Unit.
• Insert the wire tabs of the
rechargeable battery pack
into the contact slots.
• Fit the battery pack into the
compartment.
• Connect the small plug of the
Power Adapter to the Parent Unit
and the other end to a mains
power socket. Only use the
• Place the battery cover over the
compartment and gently tighten
the screw in a clockwise
direction using a small cross-
head or flat-head screwdriver.
Black
Red
C. Fasten Cover for the Parent
Unit.
D. Parent Unit Power Supply.
To Next Page
Need help?
General
Weight and Dimensions
