CHECKING
BATTERY LEVEL
While turned on and not on a call, you can
check your headset’s battery charge level
by pressing and holding both Volume
buttons.
Note: This feature does not work when headset is in
pairing mode.
The indicator light displays charge status
until you release the buttons. See “Indicator
Light” for details on indicator light and
charge status.
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
European Union Directives
Conformance Statement
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Hereby, Motorola declares that this
product is in compliance with:
Product
Approval
Number
MAKING CALLS
Note: Your H12 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Receive a call Tap the Call button
Mute or unmute a call Tap both Volume
buttons
Reject a call Press and hold a
Volume button until
you hear two
descending tones
End a call Tap the Call button
Redial last call Press and hold the
Call button until you
hear two ascending
tones
Make a voice dial call Tap the Call button
and speak the
name after the tone
MAKING CALLS CONTINUED
Function Action
Answer a second Press and hold Call
incoming call button
End an active call and Tap the Call button
resume a call on hold
Reject a second Press and hold either
incoming call Volume button until
you hear an audio
tone
Note: Some features are phone/network dependent.
To Next Page
Loading...
