Identifying Radio Controls
English
6
You will also hear a continuous talk prohibit tone, if your
call is interrupted, indicating that you should release the
PTT button, for example when the radio receives an
Emergency Call.
Switching Between Conventional Analog
and Digital Mode
Each channel in your radio can be
configured as a conventional
analog or conventional digital
channel.
NOTE: For Analog-only radios,
each channel can only be
configured as a
conventional analog
channel.
When switching from digital to analog mode, certain features
are unavailable.
To switch between an analog or a digital channel, use the
• Channel Up/Down Button, or
• programmed Channel Up or Channel Down buttons
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
Your radio also switches between digital and analog modes
during a dual mode scan (see Scan on page 16).
To use the programmed Channel Up or Channel Down buttons,
press Channel Up or Channel Down to select the required
channel.
To Next Page
Loading...