Receiving and Making Calls
English
13
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
Procedure:
1 Select the channel with the active group alias or ID. See
Selecting a Channel on page 9.
OR
Press the programmed One Touch Access button.
2 Press the PTT button to make the call. The green LED lights
up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
Making a Private Call
While you can receive and/or respond to a Private Call initiated
by an authorized individual radio, your radio
must be programmed for you to initiate a Private Call.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
Only one of these call types can be programmed to your radio
by your dealer.
You hear a negative indicator tone, when you make a Private
Call via the One Touch Access button or the Channel Up/
Down buttons, if this feature is not enabled.
Use the Quick Text Message or Call Alert features to contact an
individual radio. SeeCall Alert Operation on page 19 for more
information.Procedure:
1 Select the channel with the active radio alias or ID. See
Selecting a Channel on page 9.
OR
Press the programmed One Touch Access button.
2 Press the PTT button to make the call. The green LED lights
up.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
To Next Page
Loading...