Receiving and Making Calls
English
17
Selecting a Channel
Transmissions are sent and received on a channel. Depending
on your radio's configuration, each channel may have been
programmed differently to support different groups of users or
supplied with different features. After selecting the required
zone, select the channel you require to transmit or receive on.
Procedure:
Select a channel by using the Channel Up/ Down buttons.
• Left/Right Navigation buttons, OR
• Channel Up/Down buttons, OR
• The programmed Channel Up or Channel Down buttons
See Selecting a Zone on page 16 for more information on
selecting your required zone.
See Switching Between Conventional Analog and Digital
Mode on page 8 for information about Channel Up/ Down
buttons.
Receiving and Responding to a Radio Call
Once the channel, radio alias
or ID, or group alias or ID is
displayed, you can proceed to
receive and respond to calls.
The green LED lights up
while the radio is transmitting
and blinks when the radio is
receiving.
NOTE: The green LED lights
up while the radio is transmitting and double blinks
when the radio is receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key, or the same Key Value and
Key ID (programmed by your dealer) as the
transmitting radio (the radio you are receiving the call
from).
See Privacy on page 60 for more information.
Green
LED
To Next Page
Loading...