Receiving and Making Calls
English
20
Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to another
individual radio. It is a Private Call on an analogue system.
Procedure:
When you receive a Selective Call:
1 The green LED blinks.
2 The first text line shows the Private Call icon. The radio
displays Selective Call or Alert with Call. Your radio
unmutes and the incoming call sounds through the radio's
speaker.
3 Press the PTT button to respond to the call.
4 The green LED lights up.
5 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
6 Release the PTT button to listen.
7 If there is no voice activity for a predetermined period of
time, the call ends.
8 The display shows Call Ended.
NOTE: See Making a Selective Call on page 24 for details on
making a Selective Call.
Receiving and Responding to a Phone Call
NOTE: If Phone Call capability is enabled, you are able to
respond to a Phone Call. Check with your dealer or
system administrator for more information on this
configuration.
Phone Call as Private Call
Procedure:
When you receive a Phone Call as a Private Call:
1 The Phone Call icon appears in the top right corner. The
display shows the caller alias or Phone Call.
2 Press the PTT button to talk and release it to listen.
3 Press e to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows Unavailable and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
To Next Page
Loading...