Receiving and Making Calls
English
24
5 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
6 The display shows Call Ended.
You can also make a Private Call via Contacts (see Making a
Private Call from Contacts on page 34), manually dial a
Private Call (see Making a Private Call by Manual Dial on
page 83) or perform a quick alphanumeric search for the
required target alias via a keypad entry (see Making a Group,
Private or Phone by Alias Search on page 91).
Making a Selective Call
Just like a Private Call, while you can receive and/or respond to
a Selective Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Selective Call.
Procedure:
1 Select the channel with the active radio alias or ID. See
Selecting a Channel on page 17.
2 Press the PTT button to make the call. The green LED lights
up. The display shows the Private Call icon and the radio
alias.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 You hear a short tone. The display shows Call Ended.
NOTE:
Making a Phone Call
Check with your
dealer or system administrator for more information on
this configuration.
1 Press the programmed Phone button to enter into the
Phone Entry list.
b or c to the required radio alias or ID, and press g
to select.
OR
Press the programmed One Touch Access button.
2 If the access code was not preconfigured, the display shows
Access Code:.
Enter the access code and press g to proceed.
3 Press the PTT button to make the call. The green LED lights
up. The Phone Call icon appears in the top right corner. The
To Next Page
Loading...