Chapter 2 Service Aids
2.1 Service Aids
Table 2-1 lists the service aids recommended for working on the control head. While all of these
items are available from Motorola, most are standard workshop equipment items, and any equivalent
item capable of the same performance may be substituted for the item listed.
Table 2-1 Service Aids
Motorola
Part Number
Description Application
N/A Small flat blade screwdriver To unlatch the flex connector.
6686119B01 Control head dismantling tool To disengage the transceiver adapter from brick.
RSX4043A Torque driver (2-36lbs-in or 0.4-
4.0 N-m)
To ensure the driver bit is tighten at specified torque as
indicated in Table 5-7.
6680387A72 TORX™ T8 To tighten/loosen the T8 screw head.
N/A TORX Plus™ 6IP To tighten/loosen the 6IP screw head.
N/A Phillips no.2 To tighten/loosen the PH2 screw head
30009477001 MOTOTRBO
TM
Handheld
Control Head Front
Programming Cable
Connects the radio to a USB port for radio programming
and data applications.
N/A Plastic Tweezer To remove the PTT Paddle.
To Next Page
Loading...