Preparing Your Radio for Use
Powering Up the Radio
Press the On/Off Button ( ) briefly.
The green LED blinks and the numeric display screen
lights up.
A brief tone sounds, indicating that the power up test
is successful.
Note: There is no power up tone if the radio tones/
alerts function is disabled (see Turning the Radio
Tones/Alerts On or Off on page 49).
If your radio does not power up, contact your dealer.
To turn off the radio, press and hold the On/Off
Button.
Note: Your radio may take up to 7 seconds to
completely turn off.
Adjusting the Volume
To increase the volume, turn the Volume/Channel
Knob ( ) clockwise.
To decrease the volume, turn this knob
counterclockwise.
Note: Your radio can be programmed to have a
minimum volume offset where the volume level
cannot be lowered past the programmed minimum
volume. Check with your dealer or system
administrator for more information.
Preparing Your Radio for Use
13
English
To Next Page
Loading...