has a maximum power of 2.5 mW (4 dBm) at the 10-
meter/32 feet range.
Your radio can support up to 3 simultaneous
Bluetooth connections with Bluetooth-enabled
devices of unique types. For example, a headset, a
scanner, and a PTT-Only Device (POD). Multiple
connections with Bluetooth-enabled devices of the
same type are not supported.
Refer to your respective Bluetooth-enabled device’s
user manual for more details on your Bluetooth-
enabled device’s full capabilities.
Finding and Connecting to a Bluetooth Device
Do not turn off your Bluetooth-enabled device during
the finding and connecting operation as this cancels
the operation.
1 Turn on your Bluetooth-enabled device and place
it in pairing mode. Refer to respective Bluetooth-
enabled device’s user manual.
2 On your radio, press the programmed Bluetooth
Connect button. A tone sounds and LED blinks
yellow.
3 Your Bluetooth-enabled device may require
additional steps to complete the pairing. Refer to
respective Bluetooth-enabled device’s user
manual.
If successful, a positive indicator tone sounds.
If unsuccessful, a negative indicator tone sounds.
Disconnecting from a Bluetooth Device
On your radio, press the programmed Bluetooth
Disconnect button.
A positive indicator tone sounds when disconnected.
Switching Audio Route between Internal Radio Speaker
and Bluetooth Device
You can toggle audio routing between internal radio
speaker and external Bluetooth-enabled accessory.
Press the programmed Bluetooth Audio Switch
button.
A tone sounds when the audio route has switched.
Advanced Features in Non-Connect Plus Mode
46
English
To Next Page
Loading...