Setting the Power Level
You can customize your radio’s power setting to high
or low for each channel.
High enables communication with radios located at a
considerable distance from you. Low enables
communication with radios in closer proximity.
Press the programmed Power Level button.
Tone heard ... Radio transmitting
at ...
Positive Indicator tone Low Power
Negative Indicator tone High Power
Turning the Option Board Feature(s) On or Off
A channel can support up to 6 option board features.
Refer to your dealer or system administrator for more
information.
Press the programmed Option Board Feature
button to toggle the feature on or off.
Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice
activated call on a programmed channel. The radio
automatically transmits, for a programmed period,
whenever the microphone on the VOX-capable
accessory detects voice.
Pressing the PTT button during radio operation will
disable VOX. To re-enable VOX, do one of the
following:
• Turn the radio off and power it on again.
• Change the channel via the Scroll Up/Down
buttons.
• Change the channel via Volume/Channel Knob.
• Press the programmed VOX button to toggle the
feature on or off.
If the Talk Permit Tone feature is enabled, use a
trigger word to initiate the call. Wait for the Talk
Permit Tone to finish before speaking clearly into the
microphone.
Note: Turning this feature on or off is limited to radios
with this function enabled. Check with your dealer or
system administrator for more information.
Advanced Features in Non-Connect Plus Mode
48
English
To Next Page
Loading...