*HWWLQJ6WDUWHG
(QJOLVK
3RZHULQJ8SWKH5DGLR
Press the 2Q2II
%XWWRQ briefly. You see
MOTOTRBO (TM) on the
radio’s display
momentarily, followed
by a welcome message
or welcome image.
The green LED lights
up and the Home
screen lights up.
A brief tone sounds,
indicating that the
power up test is
successful.
127( There is no power up tone if the radio tones/alerts
function is disabled (see Turning the Radio Tones/
Alerts On or Off on page 76).
If your radio does not power up, contact your dealer.
To turn off the radio, press and hold the On/Off Button until you
see
Powering Down
on the radio’s display.
127( Your radio may take up to 7 seconds to completely turn
off.
$GMXVWLQJWKH9ROXPH
To increase the volume, turn the 9ROXPH&KDQQHO.QRE
clockwise.
To decrease the volume, turn this knob counterclockwise.
127( Your radio can be programmed to have a minimum
volume offset where the volume level cannot be turned
past the programmed minimum volume. Check with
your dealer or system administrator for more
information.
On/Off Button
Volume/Channel Knob