,GHQWLI\LQJ5DGLR&RQWUROV
(QJOLVK
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
2QH7RXFK$FFHVV –Directly initiates a predefined
Private, Phone or Group Call, a Call Alert or a Quick Text
message.
2SWLRQ%RDUG)HDWXUH–Toggles option board feature(s) on or
off for option board-enabled channels.
3$2Q2II–Toggles the radio’s internal public address (PA)
system on or off.
3HUPDQHQW0RQLWRU*
‡
–Monitors a selected channel for all
radio traffic until function is disabled.
3KRQH –Provides direct access to the Phone Contacts list.
3ULYDF\ –Toggles privacy on or off.
5DGLR$OLDVDQG,'–Provides radio alias and ID.
5DGLR&KHFN –Determines if a radio is active in a system.
5DGLR(QDEOH –Allows a target radio to be remotely
enabled.
5DGLR'LVDEOH –Allows a target radio to be remotely
disabled.
5HPRWH0RQLWRU –Turns on the microphone of a target
radio without it giving any indicators.
5HSHDWHU7DONDURXQG*
‡
–Toggles between using a repeater
and communicating directly with another radio.
6FDQ*
‡
–Toggles scan on or off.
6LWH,QIR* – Displays current Linked Capacity Plus site name
and ID. Plays site announcement voice messages for the
current site (this function is unavailable when Voice
Announcement is disabled).
6LWH/RFN2Q2II* – Toggles the automatic site roam on or
off.
6WDWXV– Selects the status list menu.
7HOHPHWU\&RQWURO –Controls the Output Pin on a local or
remote radio.
7H[W0HVVDJH –Selects the text message menu.
7UDQVPLW,QWHUUXSW5HPRWH'HNH\ –Stops the
transmission of a remote monitored radio without giving any
indicators, or an ongoing interruptible call to free the channel.
9RLFH$QQRXQFHPHQW2Q2II–Toggles Voice Announcement
on or off.
Not applicable in Capacity Plus
‡
Not applicable in Linked Capacity Plus