Motorola MOTOTRBO DM4601 - Page 25

,GHQWLI\LQJ6WDWXV,QGLFDWRUV
(QJOLVK

/(',QGLFDWRUV
LED indicators show the operational status of your radio.
%OLQNLQJUHG –Radio is receiving an emergency transmission
or has failed the self-test upon powering up, or has moved out
of range if radio is configured with Auto-Range Transponder
System.
6ROLGJUHHQ–Radio is powering up, or transmitting.
%OLQNLQJJUHHQ –Radio is receiving a non-privacy-enabled call
or data, or detecting activity or retrieving Over-the-Air
Programming transmissions over the air.
'RXEOHEOLQNLQJJUHHQ –Radio is receiving a privacy-enabled
call or data.
6ROLG\HOORZ –Radio is monitoring a conventional channel or in
Bluetooth Discoverable Mode.
%OLQNLQJ\HOORZ – Radio is scanning for activity or receiving a
Call Alert, or all local Linked Capacity Plus channels are busy.
'RXEOHEOLQNLQJ\HOORZ –Radio is no longer connected to the
repeater while in Capacity Plus or Linked Capacity Plus, all
Capacity Plus channels or Linked Capacity Plus channels are
currently busy, Auto Roaming is enabled, radio is actively
searching for a new site. Also indicates radio has yet to respond
to a group call alert, or radio is locked.
127( While in conventional mode, when the green LED
blinks, it indicates the radio detects activity over the air.
Due to the nature of the digital protocol, this activity
may or may not affect the radio's programmed channel.
For Capacity Plus and Linked Capacity Plus, there is
no LED indication when the radio is detecting activity
over the air.
Red
Yellow
Green