Motorola MOTOTRBO DM4601 - Page 28

5HFHLYLQJDQG0DNLQJ&DOOV
(QJOLVK

6HOHFWLQJD&KDQQHO
Transmissions are sent and received on a channel. Depending
on your radio's configuration, each channel may have been
programmed differently to support different groups of users or
supplied with different features. After selecting the required
zone, select the channel you require to transmit or receive on.
3URFHGXUH
Select a channel by using:
• 6FUROO8S'RZQ buttons, OR
• 9ROXPH&KDQQHO.QRE, OR
• The programmed &KDQQHO8S or &KDQQHO'RZQ buttons
See Selecting a Zone on page 17 for more information on
selecting your required zone.
See Switching Between Conventional Analog and Digital
Mode on page 7 for information about 6FUROO8S'RZQ buttons.
See Using the Volume/Channel Knob on page 8 for
information about using the 9ROXPH&KDQQHO.QRE.
See Programmable Buttons on page 4 for information about
the&KDQQHO8S or &KDQQHO'RZQ buttons.
5HFHLYLQJDQG5HVSRQGLQJWRD5DGLR&DOO
Once the channel, subscriber
alias or ID, or group alias or ID
is displayed, you can proceed
to receive and respond to
calls.
The green LED lights up
while the radio is transmitting
and blinks when the radio is
receiving.
127( The green LED lights up while the radio is transmitting
and double blinks when the radio is receiving a privacy-
enabled call.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key, or the same Key Value and
Key ID (programmed by your dealer) as the
transmitting radio (the radio you are receiving the call
from).
See Privacy on page 64 for more information.
Green
LED