Motorola MOTOTRBO DM4601 - Page 33

5HFHLYLQJDQG0DNLQJ&DOOV
(QJOLVK

0DNLQJD5DGLR&DOO
After selecting your channel, you can select a subscriber alias
or ID, or group alias or ID by using:
• The Contacts list (see Contacts Settings on page 37)
• A programmed2QH7RXFK$FFHVVbutton
• The programmed number keys – This method is for Group,
Private and All Calls only and is used with the keypad
microphone (see Making a Group, Private or All Call with
the Programmable Number Key on page 97).
• Manual Dial (via Contacts) – This method is for Private Calls
and Phone Calls only and is dialed using a keypad
microphone (see Making a Private Call by Manual Dial on
page 94, Making a Phone Call by Manual Dial on page 94)
• A programmable button – This method is for Phone Calls only
(see Making a Private Call by Manual Dial on page 94)
127( Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key as your
radio are able to unscramble the transmission.
See Privacy on page 64 for more information.
The One Touch Access feature allows you to make a
Group or Private Call to a predefined ID easily. This
feature can be assigned to a short or long
programmable button press.You can 21/< have one
ID assigned to a 2QH7RXFK$FFHVVbutton. Your
radio can have multiple 2QH7RXFK$FFHVV buttons
programmed.
0DNLQJD*URXS&DOO
To make a call to a group of users, your radio must be
configured as part of that group.
3URFHGXUH
 Select the channel with the active group alias or ID. See
Selecting a Channel on page 18.
25
Press the programmed2QH7RXFK$FFHVV button.
 Press the 377 button to make the call. The green LED lights
up. The Group Call icon appears in the top right corner. The
first text line shows the group call alias.
 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
25
Wait for the 377 Sidetone to finish (if enabled) and
speak clearly into the microphone.
