Motorola MOTOTRBO DM4601 - Page 45

$GYDQFHG)HDWXUHV
(QJOLVK

6WDUWLQJDQG6WRSSLQJ6FDQ
3URFHGXUH:
Press the programmed 6FDQ button to start or stop Scan.25
Follow the procedure below.
 Use the 6FUROO8S'RZQ buttons to select a channel
programmed with a scan list.
 g to access the menu.
 f or h to Scan and press g to select.
 f or h to Scan State and press g to select.
 f or h to required scan state and press g to select.
 The display shows Scan On when scan is enabled. The
yellow LED blinks and the scan icon appears.
25
The display shows Scan Off if scan is disabled. The LED
turns off and the scan icon disappears.
While scanning, the radio can only accept data (e.g. text
message, location, telemetry, or PC data) if received on its
Selected Channel.
5HVSRQGLQJWRD7UDQVPLVVLRQ'XULQJD6FDQ
During scanning, your radio stops on a channel/group where
activity is detected. The radio stays on that channel for a
programmed time period known as “hang time”.
3URFHGXUH
 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the transmitting radio
releases the 377 button, indicating the channel is free for
you to respond.
 Press the 377 button during hang time. The green LED
lights up.
 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
25
Wait for the 377 Sidetone to finish (if enabled) and
speak clearly into the microphone.
 Release the 377button to listen.
 If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
