Advanced Features
Radio Check
If enabled, this feature allows you to determine if
another radio is active in a system without disturbing
the user of that radio. No audible or visual notification
is shown on the target radio.
This feature is only applicable for subscriber aliases
or IDs.
Sending a Radio Check
1 Access the Radio Check feature.
Radio Control Steps
Programmed
Radio Check
button
1 Press the programmed
Radio Check button.
2
or to the
required subscriber alias or
ID and press to select.
Menu
1
to access the menu.
Radio Control Steps
2
or to Contacts
and press to select.
3
or to Radio
Check and press to
select.
The display shows The LED lights up solid green.
2 Wait for acknowledgement.
If the button is pressed when the radio is
waiting for acknowledgement, a tone sounds, and
the radio terminates all retries and exits Radio
Check mode.
Radio returns to the subscriber alias or ID screen.
Scan Lists
Scan lists are created and assigned to individual
channels/groups. Your radio scans for voice activity
by cycling through the channel/group sequence
44
English
To Next Page
Loading...