• Turn the radio off and then power it on again.
• Stop and restart a scan via the programmed Scan
button or menu.
• Change the channel via the Channel Selector
Knob.
Vote Scan
Vote Scan provides you with wide area coverage in
areas where there are multiple base stations
transmitting identical information on different analog
channels.
Your radio scans analog channels of multiple base
stations and performs a voting process to select the
strongest received signal. Once that is established,
your radio unmutes to transmissions from that base
station.
The LED blinks yellow .
To respond to a transmission during a Vote Scan,
follow the same procedures as Responding to a
Transmission During a Scan on page 48.
Contact Settings
Contacts provides “address-book” capabilities on your
radio. Each entry corresponds to an alias or ID that
you use to initiate a call.
Each entry, depending on context, associates with
one of five types of calls: Group Call, Private Call, All
Call, PC Call or Dispatch Call.
PC Call and Dispatch Call are data-related. They are
only available with the applications. Refer to the data
applications documentation for more information.
Note: If the Privacy feature is enabled on a channel,
you can make privacy-enabled Group Call, Private
Call, and All Call on that channel. Only target radios
with the same Privacy Key OR the same Key Value
and Key ID as your radio will be able to unscramble
the transmission.
See Privacy on page 72 for more information.
Your radio supports two Contacts lists, one for Analog
contacts and one for Digital contacts, with a maximum
of 500 members for each Contacts list.
Each entry within Contacts displays the following
information:
49
English
To Next Page
Loading...