Motorola MOTOTRBO DP2600 - Page 72

Analog Message Encode
Your radio is able to send pre-programmed
messages from the Message list to a radio alias or to
the dispatcher.
Sending MDC Message Encode to Dispatcher
1
to access the menu.
2
or to Message and press to
select.
3
or to Quick Text and press to
select.
4
or to the required message. Press
to send.
The display shows transitional mini notice,
confirming your message is being sent.
If the message is sent, a tone sounds and the
display shows positive mini notice.
If the message is not sent, a low tone sounds and
the display shows negative mini notice.
Sending 5–Tone Message Encode to Contact
1
to access the menu.
2
or to Message and press to
select.
3
or to Quick Text and press to
select.
4
or to the required message. Press
to select.
5
or to the required contact. Press
to select.
The display shows transitional mini notice,
confirming your message is being sent.
If the message is sent, a tone sounds and the
display shows positive mini notice.
Advanced Features
70
English