•
A tone sounds, the display shows Updating
Restarting, and your radio restarts (powers off
and on again).
•
Select between Restart Now or Postpone.
Selecting Postpone allows your radio to return to
the previous display, with an OTAP Timer icon
visible, for a period of time before the automatic
restart occurs.
Upon power up after the automatic restart occurs, the
display shows Sw Update Completed if the OTAP
update is successful or Sw Update Failed if the
OTAP update is unsuccessful.
See Software Update on page 98 for your updated
software version.
Utilities
Setting the Squelch Level
You can adjust your radio's squelch level to filter out
unwanted calls with low signal strength or channels
that have a higher than normal background noise.
Normal is the default. Tight filters out (unwanted)
calls and/or background noise; however, calls from
remote locations may also be filtered out.
Press the programmed Squelch button to toggle
squelch level between normal and tight. Follow the
procedure described next to access this feature via
the radio’s menus.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Settings and press
to select.
4
or to Squelch and press to
select.
The display shows Tight and Normal.
5
or to the required setting and press
to select.
appears besides selected setting. Screen
returns to the previous menu.
81
English
To Next Page
Loading...