The display shows beside Enabled.
The disappears from beside Enabled.
Turning the Introduction Screen On or Off
You can enable and disable the Introduction Screen if
needed.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Settings and press
to select.
4
or to Display and press to
select.
5
or to Intro Screen and press to
select.
You can also use
or to change the
selected option.
6
Press to enable/disable the Introduction
Screen.
The display shows beside Enabled.
The disappears from beside Enabled.
Turning the Voice Announcement On or Off
Note: The Voice Announcement feature can only be
enabled in MOTOTRBO CPS. If enabled, the Text-to-
Speech feature is automatically disabled, and vice
versa.
This feature enables the radio to audibly indicate the
current Zone or Channel the user has assigned, or
programmable button press. This audio indicator can
be customized per customer requirements. This is
typically useful when the user is in a difficult condition
to read the content shown on the display.
Toggle Voice Announcement On or Off.
Radio Control Steps
Programmed
Voice
Announcement
Button
Press the programmed Voice
Announcement button.
89
English
To Next Page
Loading...