4
or to Analog Mic AGC and press
to select.
5 Do one of the following:
•
Press
to enable Analog Mic AGC. The
display shows beside Enabled.
•
Press to disable Analog Mic AGC. The
disappears from beside Enabled.
Digital Mic AGC (Mic AGC-D)
This feature controls the your radio's microphone gain
automatically while transmitting on a digital system. It
suppresses loud audio or boosts soft audio to a
preset value in order to provide a consistent level of
audio.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Settings and press
to select.
You can also use or to change the selected
option.
4
or to Digital Mic AGC and press
to select.
5 Do one of the following:
•
Press to enable Digital Mic AGC. The
display shows
beside Enabled.
•
Press to disable Digital Mic AGC. The
disappears from beside Enabled.
Switching Audio Route between Internal Radio Speaker
and Wired Accessory
You can toggle audio routing between the internal
radio speaker and the speaker of wired accessory
provided that:
• The wired accessory with speaker is attached.
92
English
To Next Page
Loading...