Identifying Radio Controls
English
7
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Short press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed
duration.
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 28 for
more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Bluetooth
TM
Audio Switch – Toggles audio routing between
internal radio speaker and external Bluetooth-enabled
accessory.
Bluetooth Connect – Initiates a Bluetooth find-and-connect
operation.
Bluetooth Disconnect – Terminates all existing Bluetooth
connections between your radio and any Bluetooth-enabled
devices.
Bluetooth Discoverable – Enables your radio to enter
Bluetooth Discoverable Mode.
Call Forwarding – Toggles Call Forwarding on or off.
Voice Announcement for Channel – Plays zone and channel
announcement voice messages for the current channel. This
function is unavailable when Voice Announcement is disabled.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Intelligent Audio On/Off – Toggles Intelligent Audio on or off.
Manual Site Roam*
‡
– Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone automatic
gain control (AGC) on or off. Not applicable during a Bluetooth
session.
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete*
‡
– Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
Notifications – Provides direct access to the Notifications List.
* Not applicable in Capacity Plus
‡
Not applicable in Linked Capacity Plus
NKP_EMEA.book Page 7 Monday, July 30, 2012 9:01 AM
To Next Page
Loading...