Receiving and Making Calls
English
21
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
Users on the channel cannot respond to an All Call.
Making a Phone Call
NOTE: When you attempt to make or end a Phone Call without
the access and deaccess codes preconfigured, the
attempt fails and a negative indicator tone sounds.
Procedure:
1 Press the programmed One Touch Access button to make
a Phone Call to the predefined ID.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
2 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user.
OR
If unsuccessful:
A negative indicator tone sounds and the Phone Call
attempt fails. Repeat Step 1.
3 Press the PTT button to talk and release it to listen.
4 Press the programmed Phone Exit button to end the call
and a DTMF tone sounds.
5 If successful:
A tone sounds and your radio exits the Phone Call.
OR
If unsuccessful:
A negative indicator tone sounds and your radio returns to
the Phone Call. Repeat Step 4 or wait for the telephone user
to end the call.
For a Phone Call, you hear a short tone when making the call
fails.
NKP_EMEA.book Page 21 Monday, July 30, 2012 9:01 AM
To Next Page
Loading...